How to Fasten a Warped Laminate Countertop

The laminate overlay utilized in counter tops– the exact same material utilized in Formica– is exactly what makes laminate utilized so typically in kitchen areas. The laminate is created having a glue-covered brown layer, topped having a style layer, doned with additional resin overtop a clear layer, and coated again with another resin. Laminate overlay comes in a variety of colors and designs and is sturdy. The countertop is susceptible to warping because of the porosity of the particle board before installation the laminate covers. Secure it based on standard procedures and it’ll certainly align throughout installation.

Instructions.

Lay a level throughout the cabinets, depth-wise, roughly every 10 to 12 inches when correct, Look for level as suggested from the bubble indicator, which sits in the centre. Turn the instructions of the level and test once again in a number of areas operating side- to-side. Place wood shims underneath the case to fix large variations in level.

Find the cleats inside your cabinets. Generally discovered within the edges of every cabinet box, the cleats assist support the countertop. Include thin shims along with the cleats to fix small modifications in degree.

Connect accumulation pieces about the cabinet tops, unless their use is strictly prohibited by the manufacturer’s instructions. Spread out a bead of carpenter’s glue throughout a3/4-inch-heavy strip of wood that’s 1- inch broad and somewhat longer than the range of the cabinet to prevent the strip slipping in the cabinet. Put the strips throughout the cabinets, depth- once between as well, over every cabinet joint and wise. Connect to the cabinets with screws. Look for level once again prior to continuing.

Put together the countertop based on the maker’s guidelines. Healthy miter joints together and strengthen with miter bolts. Utilizing a design template to mark the shape, eliminated any holes, such as for sinks and puncturing all-time low of the countertop, as directed from the manufacturer. Drill a hole to begin the cutout removal and total with a jigsaw. Work thoroughly to prevent cracking and tearing the laminate surface.

Set in place on top of the cabinets. Keep in mind any areas where the wall bulges, triggering spaces on either side of the fat. Sand the side somewhat to eliminate sufficient material to enable the countertop to set flat versus the wall. Sand the unfinished edges, for example around a sink cutout, in the exact same time. So the belt strikes the top of the countertop to the bottom to prevent cracking and damage to the laminate before rotating hold the sander.

Spread caulk throughout the whole natural-side facing of the cutout in addition to beneath the counter front-edge wherever it sets above a dishwasher. It quickly absorbs wetness, resulting in eventual failure, swelling and warping since particleboard is porous.

Position the countertop in place exactly as it will certainly be connected. Place heavy weights, over the warped areas, such as dumbbells, bricks or other heavy objects. Up before you visit a noticeable downward effect to the counter increase the weight. Leave it to sit in two, if possible or place a day, to motivate the warp to reduce. If you do not have enough time to do this step installation continues to be possible.

Access it knees and your hands to access the cabinets, below the table area. Drive screws through the buildup and through the cabinet braces strips, if appropriate, in to the underside of the laminate countertop. Protect the countertop, and connected backsplash, if any, with additional screws placed within the appropriate pilot holes about the counter to the wall. They attract the countertop tight towards the cabinet even when it is deformed, whilst the screws bite in to the counter material.

Where the countertop satisfies a wall and around water line cutouts or any sink, to prevent moisture damage spread caulk along each seam. Connect the backsplash, if it comes different from the countertop, to complete the installation.